Double Door Vanity in Maple
- Soft-closing door(s)
- Solid 1/2 inch back for superior strength and stability
- No particle board or MDF
- Unparalleled strength; Holds over 150 pounds
Can't Decide? Get samples!
Pair It With
Double Door Vanity in Maple
Description
Our floating vanity is handmade in our Portland shop from the highest quality hardwood veneer. We use 3/4” stock with a sturdy 1/2” back panel which is easily cut for plumbing at the time of install. The face frame is solid hardwood with edge banded veneer doors. Doors are hung on soft-close premium hinges. One 3/4” adjustable shelf behind the doors.
Designed for a single sink with integrated or separate vanity top. Vessel, Drop-in or under-mount are ideal for this cabinet.
Our available sizes are designed to leave small overhang front and sides, usually about 1/2 inch from standard sized vanity tops (sold separately). Please contact us if you need a custom size.
Hardwood French mounting cleat system requires wall-stud connection. If possible, have your contractor add support blocking between the studs for easier installation. All necessary install hardware and detailed directions included
Vanities are finished with low VOC Hard Wax Oil for a durable, water-resistant satin sheen. We do not use stain— only clear oil for a natural color. Variations in color and grain should be expected from real wood.
Professional install recommended. Listing includes Vanity Cabinet only. Sink and faucet not included.
Handmade in Maine
Dimensions
Free Shipping in Contiguous U.S.
Handcrafted in Maine, USA
Eco-Friendly Packaging
Made with Domestic Hardwoods
Built to Last
The Krovel Furniture Co. woodshop was born from a desire to create simple, beautiful, and affordable furniture. We strive to select the finest materials and we mill, fabricate, and finish each piece in-house.
Hand-Selected, Hand-Finished
We hand-select the finest rough-sawn lumber (harvested and rough-milled in the U.S.) and we mill, construct, and hand-finish one piece at a time in our Maine shop–nothing is outsourced.
Clean Lines, Simple Joinery
Our passion is working with wood, but just as important is simplicity of design. Clean lines and well-proportioned shapes utilizing simple joinery techniques help to keep our products accessible and affordable. We value good design, quality craftsmanship, and durable, beautiful materials.
FAQs
Do you offer custom sizes?
Yes! We’re happy to build a size that works for you. Contact us with your dimensions and wood choice for a quote.
Can I choose to add my own drawer hardware?
Yes. When adding the item to your cart, you may choose to add our standard finger-hole or “no hole” for DIY hardware.
All measurements are exterior dimensions - what are the interior dimensions?
Finished wood thickness is 5/8” so the interior width and height is 1.25” less than exterior dimensions. The solid back with the integrated mounting cleat is 1/2” with a 3/4” cleat for a total interior depth of less 1.25”. For our Media and Storage cabinets with sliding doors, subtract another 3/4” for the doors, total is less 2” for back and doors combined. Contact us if you have questions!
I am unsure of size, what do I do?
We always recommend that our clients make a simple mock-up in cardboard and tape in place to the wall. This will give you a very good idea of size and scale in your space.